P2833

P2833 Ford engine fault code diagnosis, code meaning,symptoms and how to fix it.

P2833 Diagnosis

The CHM does not suupport PWM type DRLs. The vehicle has a BHM mismatch with the CHM. Replace the CHM with one that is compatible with the BHM.The ICU reads the wiper switch position and sends the status of the switch to the BHM. This fault becomes active when the ICU reads that both LO speed and HI speed are active at the same time.

Troubleshoot for a wiring short to ground fault on any of the CHM output or BHM output circuits discussed above. The fault remains active until the ignition is turned ON when the fault is no longer present. Some BHM configurations force this circuit off until the ignition switch is cycled.

Ford P2833 Fault Code Meaning :

Ford P2833 Symptoms :

Ford P2833 Reasons :

How To Fix Ford P2833 Trouble Code ?

A code is a fault code and it indicates that something has gone wrong with your car's engine.

It can be caused by many different problems, including a faulty battery, a bad fuel pump, or even a cracked exhaust manifold.

You will need to diagnose the problem before you can fix it. The best way to do this is with an OBD scanner tool.

A scan tool will tell you what needs fixing and how much it will cost in order to fix that particular issue.